Configure your Shapercube

Shapercube Basic Kit includes:

Water-jet cut aluminium parts. (Good quality cut, little filing is required on a few parts) Hard chrome plated or stainless steel linear shafts Screws, Nuts, washers, threaded bars Bearings 3 high quality 1,8° Nema 23 size bipolar stepper motors 3 small gears for X&Y 3 belts for X&Y 6 large gears for Z 3 endless belts for Z DC Extruder drive mechanism 4 rubber feet Acrylic print bed MK1 Assembled heater PEEK insulator Interchangeable 0.5mm Nozzle Tools not included Build instructions with many pictures available in English in our Wiki

(glass bead blasted version)

Base price 979,00 € 822,69 € including VAT excluding VAT plus shipping

Surface of the water-jet parts

The water jet parts have a good cut quality. However, some of the abrasives used in the progress will stick onto the surface of the parts. Also, there may be scratches on the surface. This will not hinder the function but is probably aesthetically unpleasant.

No surface threadment	Glass bead blasted
No surface threadment Some of the water-jet abrasive may still stick onto the surface May need to be cleaned up and/or polished Parts may have some small scratches	Surface gets glass bead blasted Blasting removes the abrasive and small scratches. We try to remove deeper Scratches by polishing them before treatment. Consistant looking, matt surface Both sides will be treated Sample picture (left: out of the water-jet, right: glass bead blasted)
Default	99,99 € including VAT (84,03 € excluding VAT)
Estimated shipping: week 36-37

Electronics

All electronics come unassembled, unless stated otherwise. All parts to solder are through hole components and can be easily soldered by anyone. A soldering iron and solder is required. A detailed instruction is available for every board.

Complete Electronics	Endstops only	No electronics
1x Arduino Mega (fully assembled) Shield for Arduino Mega 3x Stepper Driver 1.2 1x DC / PWM combo board 3x Opto Endstop Cables and heat shrink tubing Acrylic electronic mounting plate	3x Opto Endstop
Default	-92,90 € including VAT (-78,07 € excluding VAT)	-108,90 € including VAT (-91,51 € excluding VAT)

Power Supply

Shapercube needs a standard computer ATX size power supply.

220V Power supply	No power supply
Generic ATX power supply 220V only Type F (CEE 7/4) connector included
Default	-9,90 € including VAT (-8,32 € excluding VAT)

Current Revision: Rev. 3 (v.1.1) or later

Please note Despite lots of testing, we cannot exclude that bugs will appear. On bug fixes and improvements that are made to the design, we'll provide printable upgrade parts if possible. Should we find bugs that will affect operation before shipping, we'll supply a printed spare part.

In case something isn't working as it should be please contact us. We're also interested in your hacks if you do such!